This class represents an XAudio2 audio graph, device, and mastering voice
XAudio2 requires COM be initialized as a prerequisite using Windows::Foundation::Initialize, CoInitialize, or CoInitializeEx.
All DirectXTK for Audio components require an AudioEngine instance. For exception safety, it is recommended you make use of the C++ RAII pattern and use a std::unique_ptr.
The constructor optionally takes a number of parameters:
http://msdn.microsoft.com/en-us/library/windows/desktop/ee415752.aspx
Note: With XAudio 2.7, the developer runtime must be installed on the system for the AudioEngine_Debug case to succeed. With XAudio 2.8 on Windows 8.x, the debug support is built into the OS.
Note: On Windows phone 8 and Xbox One, the enumeration only returns the 'default' audio device identifier with the description "Default"
At some later point (typically after detecting a new audio device is available on the system), you can retry by calling Reset (). If this returns 'true', then the AudioEngine is no longer in 'silent' mode. After that, future calls to SoundEffect or WaveBank's Play() will result in one-shots being fired. All SoundEffectInstances are in a stopped state, but can be started after the successful call to Reset().
Parameters to Reset are the similar as for the AudioEngine constructor. If the original object was created with AudioEngine_ThrowOnNoAudioHW, then Reset will throw if no default audio device is found.
http://msdn.microsoft.com/en-us/library/windows/desktop/aa363431.aspx
Or you can make use of IMMNotificationClient
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371417.aspx
http://code.msdn.microsoft.com/windowsapps/Device-Enumeration-Sample-a6e45169
Note that if XAudio2 encounters a critical error (typically because the current audio device is disconnected or on the Windows platform if the speakers are unplugged from the current audio device), then the audio engine will automatically be in 'silent' mode. This can be detected either by a 'false' return from Update() or calling IsCriticalError(). If this occurs, you should try calling Reset() to try the new 'default' device' if there is one. If that retry fails, you should wait until a new audio device is available (ala 'silent' mode above).
Optionally AudioEngine_ReverbUseFilters can be used with AudioEngine_EnvironmentalReverb to provide some additional reverb/occlusion effects.
Therefore, DirectXTK for Audio supports attaching a mastering volume limiter xAPO to the mastering voice by setting the AudioEngine_UseMasteringLimiter flag. It uses default settings, which can be modified by calling SetMasteringLimit( release, loudness ).
http://msdn.microsoft.com/en-us/library/windows/desktop/microsoft.directx_sdk.xapofx.fxmasteringlimiter_parameters.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/ee415754.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/ee415714.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371455.aspx
Header
#include <Audio.h>
Initialization
This creates an XAudio2 interface, an XAudio2 mastering voice, and other global resources.XAudio2 requires COM be initialized as a prerequisite using Windows::Foundation::Initialize, CoInitialize, or CoInitializeEx.
// This is only needed in Win32 desktop apps CoInitializeEx( nullptr, COINIT_MULTITHREADED );
All DirectXTK for Audio components require an AudioEngine instance. For exception safety, it is recommended you make use of the C++ RAII pattern and use a std::unique_ptr.
std::unique_ptr<AudioEngine> audEngine( new AudioEngine() );The constructor optionally takes a number of parameters:
AudioEngine( AUDIO_ENGINE_FLAGS flags = AudioEngine_Default,
_In_opt_ const WAVEFORMATEX* wfx = nullptr,
_In_opt_z_ constwchar_t* deviceId = nullptr,
AUDIO_STREAM_CATEGORY category = AudioCategory_GameEffects );Parameters
flagsA combination of audio engine flags. Defaults to AudioEngine_Default.
- AudioEngine_Debug - Enables debugging facilities. For XAudio 2.7 this requires the Developer Runtime.
- AudioEngine_EnvironmentalReverb - Enables I3DL2 environmental reverb effects for 3D positional audio.
- AudioEngine_ReverbUseFilters - An additional feature for 3D positional audio reverb. Requires AudioEngine_EnvironmentalReverb.
- AudioEngine_UseMasteringLimiter - Enables a mastering volume limiter xAPO for the mastering voice. This is recommended for avoiding distortion or clipping, particularly when applying 3D positional audio.
- AudioEngine_DisableVoiceReuse - By default, DirectXTK for Audio will reuse XAudio2 source voices for one-shots if possible. If using this flag, voice reuse is disabled and one-shot sounds will create and destroy source voices on every Play.
- AudioEngine_ThrowOnNoAudioHW - By default, if there is no audio hardware available DirectXTK for Audio will automatically enter 'silent mode'. If this flag is provided, a C++ exception is generated instead.
Note: AUDIO_ENGINE_FLAGS is used as a typed flag enum. Only operator| is overloaded to combine them, so operations like |= are not available without additional static_cast<> statements.wfx
Specifies the output format for the XAudio2 mastering voice (primarily the channel count and sample rate). If null, it uses the device defaults.deviceId
Specifies the output debug for the XAudio2 mastering voice. When using XAudio 2.8, this must be a WinRT device identifier, while on XAudio 2.7 this is a WASAPI audio end-point identifier. If null, it uses the default audio device.category
Specifies the audio end-point category for the XAudio2 mastering voice. On XAudio 2.7, this value is ignored.
Debugging facilities
When creating the AudioEngine, you can specify enabling of XAudio2 debugging facilities by including the AudioEngine_Debug flag.
AUDIO_ENGINE_FLAGS eflags = AudioEngine_Default;
#ifdef _DEBUG
eflags = eflags | AudioEngine_Debug;
#endif
std::unique_ptr<AudioEngine> audEngine( new AudioEngine( eflags ) );http://msdn.microsoft.com/en-us/library/windows/desktop/ee415752.aspx
Note: With XAudio 2.7, the developer runtime must be installed on the system for the AudioEngine_Debug case to succeed. With XAudio 2.8 on Windows 8.x, the debug support is built into the OS.
Device enumeration
AudioEngine provides a simple wrapper over the platform-specific audio device enumeration:auto enumList = AudioEngine::GetRendererDetails(); if ( enumList.empty() ) { // No audio devices } else { for( auto it = enumList.cbegin(); it != enumList.cend(); ++it ) { // it->deviceId.c_str() - this is the device/end-point identifier you can// pass as a parameter to AudioEngine// it->description.c_str() - this is a textual description } }
Note: On Windows phone 8 and Xbox One, the enumeration only returns the 'default' audio device identifier with the description "Default"
Silent mode
If the initial device creation fails to find an audio device, by default AudioEngine creation will succeed and be in a 'silent' mode--if AudioEngine_ThrowOnNoAudioHW is given, then it will throw a C++ exception instead. This allows various DirectXTK for Audio objects to be created and methods called, but no audio processing will take place. This can be detected either by a 'false' return from Update () or calling IsAudioDevicePresent ().At some later point (typically after detecting a new audio device is available on the system), you can retry by calling Reset (). If this returns 'true', then the AudioEngine is no longer in 'silent' mode. After that, future calls to SoundEffect or WaveBank's Play() will result in one-shots being fired. All SoundEffectInstances are in a stopped state, but can be started after the successful call to Reset().
bool Reset( _In_opt_ const WAVEFORMATEX* wfx = nullptr, _In_opt_z_ constwchar_t* deviceId = nullptr );
Parameters to Reset are the similar as for the AudioEngine constructor. If the original object was created with AudioEngine_ThrowOnNoAudioHW, then Reset will throw if no default audio device is found.
Win32 desktop applications
For Win32 desktop applications, you can be informed of new audio devices in your application with:
#include <dbt.h>
...
DEV_BROADCAST_DEVICEINTERFACE filter = {0};
filter.dbcc_size = sizeof( filter );
filter.dbcc_devicetype = DBT_DEVTYP_DEVICEINTERFACE;
filter.dbcc_classguid = KSCATEGORY_AUDIO;
HDEVNOTIFY hNewAudio = RegisterDeviceNotification( hwnd, &filter, DEVICE_NOTIFY_WINDOW_HANDLE );
...
case WM_DEVICECHANGE:
if ( wParam == DBT_DEVICEARRIVAL ) {
auto pDev = reinterpret_cast<PDEV_BROADCAST_HDR>( lParam );
if( pDev ) {
if ( pDev->dbch_devicetype == DBT_DEVTYP_DEVICEINTERFACE ) {
auto pInter =
reinterpret_cast<const PDEV_BROADCAST_DEVICEINTERFACE>( pDev );
if ( pInter->dbcc_classguid == KSCATEGORY_AUDIO ) {
// New audio devicehttp://msdn.microsoft.com/en-us/library/windows/desktop/aa363431.aspx
Or you can make use of IMMNotificationClient
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371417.aspx
Windows Store applications
You can be informed of new audio devices by using the WinRT class DeviceWatcher in the Windows.Device.Enumeration namespace.http://code.msdn.microsoft.com/windowsapps/Device-Enumeration-Sample-a6e45169
Per-frame processing
Update () should be called often, usually in a per-frame update. This can be done on the main rendering thread, or from a worker thread. This returns false if the audio engine is the 'silent' mode.if ( !audEngine->Update() ) { // No audio device is activeif ( audEngine->IsCriticalError() ) { ... } }
Note that if XAudio2 encounters a critical error (typically because the current audio device is disconnected or on the Windows platform if the speakers are unplugged from the current audio device), then the audio engine will automatically be in 'silent' mode. This can be detected either by a 'false' return from Update() or calling IsCriticalError(). If this occurs, you should try calling Reset() to try the new 'default' device' if there is one. If that retry fails, you should wait until a new audio device is available (ala 'silent' mode above).
Pausing
Typically games will suspend audio when paused or the game is 'tabbed away' from. Suspend () and Resume () can be used to globally halt/restart audio processing.Positional 3D audio
AudioEngine by default supports both standard and positional 3D audio voices, but without environmental reverb. If AudioEngine_EnvironmentalReverb is given, then a reverb effect is created and used for all 3D audio voices--it is not applied to standard voices. You can use SetReverb () with I3DL2 presets or provide 'native' reverb settings.audEngine->SetReverb( Reverb_Quarry ); ... audEngine->SetReverb( Reverb_Off );
Optionally AudioEngine_ReverbUseFilters can be used with AudioEngine_EnvironmentalReverb to provide some additional reverb/occlusion effects.
Voice management
- SetDefaultSampleRate( sampleRate ) is used to control the sample rate for voices in the one-shot pool (see Play in SoundEffect and WaveBank). This should be the same rate as used by the majority of your content. It defaults to 44100 Hz. This value is never used if AudioEngine_DisableVoiceReuse was specified.
- TrimVoicePool() can be used to free up any source voices in the 'idle' list for one-shots, and will cause all non-playing SoundEffectInstance objects to release their source voice. This is used for keeping the total source voice count under a limit for performance or when switching sections where audio content formats change dramatically.
Note that one-shots voices must have completely stopped playing before they are put into the idle pool. You should therefore ensure Update() is called twice with some delay between them before calling TrimVoicePool() for maximum effectiveness.
- SetMaxVoicePool( maxOneShots, maxInstances ) can be used to set a limit on the number of one-shot source voices allocated and/or to put a limit on the source voices available for SoundEffectInstance. If there are insufficient one-shot voices, those sounds will not be heard. If there are insufficient voices for a SoundEffectInstance to play, then a C++ exception is thrown. These values default to 'unlimited'.
Mastering volume limiter
The XAudio2 audio renderer makes use of single-precision floating-point values, which can exceed the range of the audio hardware, particularly after 3D positional audio computations, custom xAPOs, or volume settings greater than 1.0. This can produce distortion or other clipping artifacts in the final output.Therefore, DirectXTK for Audio supports attaching a mastering volume limiter xAPO to the mastering voice by setting the AudioEngine_UseMasteringLimiter flag. It uses default settings, which can be modified by calling SetMasteringLimit( release, loudness ).
http://msdn.microsoft.com/en-us/library/windows/desktop/microsoft.directx_sdk.xapofx.fxmasteringlimiter_parameters.aspx
AUDIO_ENGINE_FLAGS eflags = AudioEngine_UseMasteringLimiter;
#ifdef _DEBUG
eflags = eflags | AudioEngine_Debug;
#endif
std::unique_ptr<AudioEngine> audEngine( new AudioEngine( eflags ) );Statistics
The GetStatistics function returns information on the number of playing sounds, allocated instances, audio bytes in loaded SoundEffect and WaveBank objects, and XAudio2 source voices allocated for various purposes. These values do not rely on debug faculties to be enabled.auto stats = engine->GetStatistics(); printf( "\nPlaying: %Iu / %Iu; Instances %Iu; Voices %Iu / %Iu / %Iu / %Iu; %Iu audio bytes\n", stats.playingOneShots, stats.playingInstances, stats.allocatedInstances, stats.allocatedVoices, stats.allocatedVoices3d, stats.allocatedVoicesOneShot, stats.allocatedVoicesIdle, stats.audioBytes );
Properties
- GetOutputFormat ()
Returns the format consumed by the mastering voice (which is the same as the device output if defaults are used) as a WAVEFORMATEXTENSIBLE.
- GetChannelMask ()
Returns the output channel mask
- GetOutputChannels ()
Returns the number of output channels
- IsAudioDevicePresent ()
Returns true if the audio graph is operating normally, false if in 'silent mode'
- IsCriticalError ()
Returns true if the audio graph is halted due to a critical error (which also places the engine into 'silent mode')
Low-level interface access
The following methods can be used to obtain the low-level XAudio2 interface objects used by DirectXTK for Audio. Be sure to also use RegisterNotify, UnregisterNotify, and the IVoiceNotify interface to get proper notifications from the XAudio2 engine. You should prefer to use AllocateVoice to creating your own source voices if possible, and be sure to use DestroyVoice to free the source voice if it is not a 'oneshot' voice. One shot voices are managed and cleaned up by AudioEngine::Update().- IXAudio2* GetInterface ()
- IXAudio2MasteringVoice* GetMasterVoice ()
- IXAudio2SubmixVoice* GetReverbVoice ()
- X3DAUDIO_HANDLE& Get3DHandle ()
Further reading
http://msdn.microsoft.com/en-us/library/windows/desktop/hh405049.aspxhttp://msdn.microsoft.com/en-us/library/windows/desktop/ee415754.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/ee415714.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371455.aspx